• Content count

  • Joined

  • Last visited

Community Reputation

0 Neutral

About Dirtbag1981

  • Rank
    Citroen C1 GT
  1. Hi all, looking at adding some bits to my A3 and was wondering if they are possible please and costs ? Looking at Real Xenon headlights for it, I can see that i can buy a "Audi A3 S3 8P + TT 8J Xenon headlights adapter cable set " Would I just need the Xenon headlights after this ? Cruise control, I can see there are companies on ebay that can do this for around £200 ? Front arm rest lid clip has broken, is there a way I can buy just the clip ? Leather interior can see lots on ebay, but not sure what to go for. cheers in advance DB
  2. A3 Bluetooth paring issue

    Hi mate it wont pair with another phone, so I assume the BT is gone. Where is it located please ?
  3. A3 Bluetooth paring issue

    No mate, I will try tomorrow. Is the BT module easy to fix ? Thanks
  4. Audi A3 2.0 Idle issue

    Just an update to this thread, for whatever reason this problem has vanished ? No idea why, but I'm not complaining
  5. A3 Bluetooth paring issue

    Hi all, I had my N95 paired with my 05 A3 TDI, and was working perfectly. I had a service on the car and the service light/ message was reset. Now my N95 cannot find the A3 when I search for it. It used to say "connect to audio device" but now on search it says N95 only. Is there something I am doing wrong , I tried searching after just turning on the ignition, and get the same result ? thanks in advance DB
  6. Audi A3 2.0 Idle issue

    Not sure mate to be honest. I havent had it checked yet. The problem goes away sometimes when I rev the engine slightly and it drops down again, it is not constant. Switch the engine off and on again straight after and its back down to 800 again... weird?
  7. Audi A3 2.0 Idle issue

    Hi mate thanks for the reply, its a TDI I forgot to mention
  8. Audi A3 2.0 Idle issue

    hi lads, I have an 2005 Audi A3 Sportback 2.0 with 120k on the clock which has just had a large service. When sitting in idle it ticks over at 800 revs for a few mins, then it automatically moves up to 1000 on its own as if im adding power which I'm not. If I switch the engine off then on it goes back to 800 again then to 1000. Any ideas please ? cheers DB
  9. Thanks mate, i will probablly suffer if for now, but will check these out in the new year. cheers again
  10. Hi mate, many thanks for this, saved me hours of working it out. Well, at least it works as much as I need it to
  11. Hi lads I have an 2005 audi a3 sportback, which came with a bury system 8 in car kit. I have swapped over the blackberry cradle for a nokia n95 8gb. I have followed instructions on how to pair it, which works and now it interrups the radio when rung etc - fine ! However I have a multifunction steering wheel, and according to the manual, it means I can dial, answer, scroll phonebook, change volume etc with the phone from the steering wheel - this does not work, I cannot get the above to work with the steering wheel,all it says is no function, any ideas please ? cheers DB
  12. The PCD on these alloys ?

    Excellent - many thank you soo much. If this was star wars, you would be Yoda !!
  13. The PCD on these alloys ?

    Hi lads, these have just come off of my 2005 A3 sportback. They came as an optional upgrade. Details are : 17 Inch 16 spoke alloys - 5 stud Part number : 8P0601025AF I am trying to sell them but I do not know the PCD. Please see the picture, and I would really apreciate if anybody knew what the pcd is on the alloys please ! http://img220.imageshack.us/img220/8371/07102010585.jpg Cheers DB
  14. Audi A3 3.2 DSG - juddering around 2k revs

    Yeah many thanks, probally charge me 50 quid due to the strength needed to push it down with one finger !
  15. Audi A3 3.2 DSG - juddering around 2k revs

    Okay I have an update - my mechanic discovered that one of the coils was "sitting up" abit so was causing the problem (probally the shoddy garage I took it to before didnt put it in right), just a simple push down and the car runs 100%. Bout time I had some luck with this machine. many thanks all for your help