Jump to content

[Audi A3/S3] DSG can't stall can it?


stewarta13wsb
 Share

Recommended Posts

I'm on my second A3 with DSG. I've had this one since November and it's only got just under 3000 miles on it.

When I reverse out in the morning (I'm on the flat by the way) I don't usually touch the accelerator, there is enough power to slowly pull out (it's a tight turn) without it.

I've always done this and it's never been a problem... until now.

It's as if it wants to stall, there's even the slight lurch you'd get on a manual. Obviously it doesn't cut out though, it just starts going again.

Would you say this is normal and it just needs some revs or is something not quite right, or getting worse?

Link to comment
Share on other sites

I usally have to start my A3 from a very cold start as the car sits next to an open feild and I have never "Touch Wood " hand an issue with the DSG box.

I would at least mention it to your local dealer as there may be an know issue with a specific firmware revion for the box.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...