vagcom induces fault codes on B7 A4

paul_tdi · 25-06-2009, 07:53 PM

A good mate has just bought a B7 2.5tdi sline and asked me to scan etc prior to buying.

Scans fine with no errors but then induces a fault causing it to enter limp mode. Fault code is:

Thursday,25,June,2009,19:54:21:52379
VCDS Version: Release 805.4
Address 01: Engine
Control Module Part Number: 8E0 907 401 AF
Component and/or Version: 2.5l V6 TDI 0000SG 0030
Software Coding: 02002
Work Shop Code: WSC 06325
Additional Info: WAUZZZ8E25A480011 AUX6Z0D0459903
Additional Info: 00008059 130 106KC318_1.V14810580581
1 Fault Found:
01318 - Control Module for Injection Pump (J399)
34-00 - No Elaboration Available
Readiness: 0 0 X X X

Also seemed to lock RNSe up!!

He was a little shocked as was I, fault cleared by disconnecting battery for a while. Re scanned to get same problem! Never had any issues on other cars but have recently upgraded vagcom.

Any ideas anyone? Cheers, Paul

shark_90 · 26-06-2009, 08:28 AM

Never seen that before mate, have you notified Ross Tech?

paul_tdi · 26-06-2009, 09:23 AM

Not notified ross tech yet.

Going to check in my car later as recently upgraded the software. My main concern is that there is an underlying problem with his car more than my vagcom itself.

I will email the findings when I get home to ross tech to see if they have any experience of it.

Sebastian · 28-06-2009, 10:02 PM

We've seen those already a couple of times, happens rarely to be exact but happens.

01318 - Ross-Tech Wiki

25-06-2009, 07:53 PM	#1 (permalink)
paul_tdi Saab 9-3 Aero Join Date: May 2006 Location: Hilperton, Wiltshire Posts: 792	vagcom induces fault codes on B7 A4 A good mate has just bought a B7 2.5tdi sline and asked me to scan etc prior to buying. Scans fine with no errors but then induces a fault causing it to enter limp mode. Fault code is: Thursday,25,June,2009,19:54:21:52379 VCDS Version: Release 805.4 Address 01: Engine Control Module Part Number: 8E0 907 401 AF Component and/or Version: 2.5l V6 TDI 0000SG 0030 Software Coding: 02002 Work Shop Code: WSC 06325 Additional Info: WAUZZZ8E25A480011 AUX6Z0D0459903 Additional Info: 00008059 130 106KC318_1.V14810580581 1 Fault Found: 01318 - Control Module for Injection Pump (J399) 34-00 - No Elaboration Available Readiness: 0 0 X X X Also seemed to lock RNSe up!! He was a little shocked as was I, fault cleared by disconnecting battery for a while. Re scanned to get same problem! Never had any issues on other cars but have recently upgraded vagcom. Any ideas anyone? Cheers, Paul __________________ Audi S3 Millteks, 200 Cell Cat, Hybrid Turbo Audi A3 Sport TDI DSG Williams Clio 1 and 2 - Lots of rust!

26-06-2009, 08:28 AM	#2 (permalink)
shark_90 Selachimorpha Join Date: Apr 2005 Posts: 11,504	Never seen that before mate, have you notified Ross Tech? __________________ European vehicle Remapping and Diagnostics from Shark Performance Tuning - Immobiliser deactivation - PIN/SKC retrieval - Key coding - DIS/Cruise retrofits - Colour DIS/Maxidot/MFA+ dashboard swaps www.sharkperformance.co.uk Take control of your tuning with the new Self Tuning System from Shark Performance

26-06-2009, 09:23 AM	#3 (permalink)
paul_tdi Saab 9-3 Aero Join Date: May 2006 Location: Hilperton, Wiltshire Posts: 792	Not notified ross tech yet. Going to check in my car later as recently upgraded the software. My main concern is that there is an underlying problem with his car more than my vagcom itself. I will email the findings when I get home to ross tech to see if they have any experience of it. __________________ Audi S3 Millteks, 200 Cell Cat, Hybrid Turbo Audi A3 Sport TDI DSG Williams Clio 1 and 2 - Lots of rust!

28-06-2009, 10:02 PM	#4 (permalink)
Sebastian Citroen C1 GT Join Date: Aug 2006 Location: Magdeburg, Germany Posts: 103	We've seen those already a couple of times, happens rarely to be exact but happens. 01318 - Ross-Tech Wiki __________________ Sebastian