Jump to content

anyone out there have a miltek exhaust?


Zenyck100
 Share

Recommended Posts

[ QUOTE ]

cheers m8 reason i asked is ive got a 18 month old little boy and just reserved an R32 today and found out it has AMD stage 2. only found out when i asked sales guy to dig out all paper work for the car. only wanted to check if they had serviced it etc.

[/ QUOTE ]

Should be ok...an AMD stg 2 includes the Miltek [?].. grin.gif

the std exhaust is very boomy from 2k to 3k ...it would keep the kids awake.. mad.gif

cheers and enjoy 169144-ok.gif

Link to comment
Share on other sites

[ QUOTE ]

[ QUOTE ]

cheers m8 reason i asked is ive got a 18 month old little boy and just reserved an R32 today and found out it has AMD stage 2. only found out when i asked sales guy to dig out all paper work for the car. only wanted to check if they had serviced it etc.

[/ QUOTE ]

Should be ok...an AMD stg 2 includes the Miltek [?].. grin.gif

the std exhaust is very boomy from 2k to 3k ...it would keep the kids awake.. mad.gif

cheers and enjoy 169144-ok.gif

[/ QUOTE ]

Ask for a discount because it is modded confused.gif

Afterall you bought/reserved a standard car UHOH7.GIF

Link to comment
Share on other sites

[ QUOTE ]

Should be ok...an AMD stg 2 includes the Miltek

[/ QUOTE ]

Stage II does, but make sure it does have the silencer (can be supplied without) otherwise it could be rather noisy for the littleun.

I had my Miltek ST on for around 6 months & my kiddies never complained, they just shouted a lot!!! Now gone silenced, and it's very pleasant - most of the time! wink.gif Mind you, my zorst with the ST section appeared to be much louder than most. crazy.gifconfused.gif

Enjoy the car. 169144-ok.gif

Link to comment
Share on other sites

I'm tempted on having one of these Milltek Straight through exhausts installed but i'm worried about the warning lights coming on when the exhaust valve isn't attached. I've read you can have a resistor put in, this sounds like a bit of a pain to me. We shall see, i'm gonna wait for the Revo chip then possibly have it installed.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...