jsc1976 Posted March 20, 2007 Report Share Posted March 20, 2007 Hi and apologies if this has been covered before but I couldn't dig anything up with the search. I have recently acquired an 04 S4 Cab which had OEM bluetooth connected to a Symphony II. I have just retrofitted rns-e and would like to upgrade the bluetooth module to integrate fully with rns-e (the current module is 8P0 862 335 A and I believe I need a H). The question is, where is the module located (I have read somewhere that it is under the drivers/passenger seat) and has anybody posted a guide as to how to access this?? Any help would be much appreciated. Thanks jsc1976 Link to comment Share on other sites More sharing options...
craigyb Posted March 20, 2007 Report Share Posted March 20, 2007 Remove the seat, remove the trim from the Bottom of the A pillar Lift the carpet Locate the module in the black box, open and swap. Link to comment Share on other sites More sharing options...
jsc1976 Posted March 20, 2007 Author Report Share Posted March 20, 2007 Thanks Craig, Which seat is it under? Also I assume I would need to disconnect the battery prior to removing the seat - is there anything else I need to worry about - don't want to break anything!? Many thanks Link to comment Share on other sites More sharing options...
craigyb Posted March 20, 2007 Report Share Posted March 20, 2007 Drivers seat in the UK, I never disconnect the battery, its up to you really Link to comment Share on other sites More sharing options...
jsc1976 Posted March 20, 2007 Author Report Share Posted March 20, 2007 Thanks again Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now