jasondavidwade Posted July 24, 2009 Report Share Posted July 24, 2009 Hi, I'm looking for the 12V supply that goes on/off with the ignition. I have an RNS-E with bt phone module fitted by TCL satnav, and a Dension Gateway 300 CAN. Now I'm fitting a Dension WiDrive and need the ignition 12V. I have been through the dension connector/loom and can't find it. I have all the glovebox off right now so I could do with finding it tonight! Thanks Link to comment Share on other sites More sharing options...
craigyb Posted July 24, 2009 Report Share Posted July 24, 2009 Hi Jason No switched live available, best bet is your fusebox on the drivers side. There is a small fuse for brakes I think that you can tap off for switched live. Use a test to see what locations are switched with the ignition. Craig Link to comment Share on other sites More sharing options...
shark_90 Posted July 26, 2009 Report Share Posted July 26, 2009 Fuse 5 should be the one Link to comment Share on other sites More sharing options...
jasondavidwade Posted July 26, 2009 Author Report Share Posted July 26, 2009 Thanks guys, I did find another thread saying the RNS-E gets the ignition signal over CAN, then I took the steering column cover off and hooked up to Fuse 5 as it happens. Must say it's easy to take off and replace the audi panels, everything lines up! no clips break! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now