JamesA6 Posted December 9, 2012 Report Share Posted December 9, 2012 Hello, New Guy here, had my 2007 Audi A6 Le Mans Quattro 2.7L TDI for about 2 days now, loving life. anyway my question: The wheels currently on her are the Le mans standard wheels, 19 inch with 255/35/R19 tyres. I cannot find what the width of them or what offset they are anywhere, does anyone know on here or should I just go see a dealer for it? Just for interest, the new I'm after are 19 inch 8.5J 245/35/R19 tyres offset et 45. Hoping they fit. cheers anyone who can help. Link to comment Share on other sites More sharing options...
Ian_C Posted December 9, 2012 Report Share Posted December 9, 2012 The ET and alloy size are usually stamped under the centre cap, or on the inside if the bolt holes are exposed and there is no centre cap (like below for example). Yours doesn't have a full sized spare does it? Would be easier to check the spare than jacking the car up. ET45 is a normal offset, B5 B6 B7 S4 are all this offset etc Audi*A6 Avant*TDi quattro Le Mans Tip DVD nav, Black Optics for Sale - Fontain Motors » Iver » Buckinghamshire Link to comment Share on other sites More sharing options...
JamesA6 Posted December 10, 2012 Author Report Share Posted December 10, 2012 Cheers mate, I'll have a look but I figure I'll have to do take a wheel off to get the width of the wheels. Nice to know the standard offset is 45, hopefully the wheels on it are 8.5J and then the wheels I want are a direct swap Link to comment Share on other sites More sharing options...
jsuka6 Posted December 10, 2012 Report Share Posted December 10, 2012 Cheers mate, I'll have a look but I figure I'll have to do take a wheel off to get the width of the wheels. Nice to know the standard offset is 45, hopefully the wheels on it are 8.5J and then the wheels I want are a direct swap Can't confirm the offset but the standard Le Mans wheels are 8.5J. Link to comment Share on other sites More sharing options...
JamesA6 Posted December 10, 2012 Author Report Share Posted December 10, 2012 Cheers guys, I'll get a wheel off or cap off, and hopefully confirm both the offset and width tonight. Help's anyone in the future Link to comment Share on other sites More sharing options...
Kell Posted December 14, 2012 Report Share Posted December 14, 2012 Ours (3.0 TDI Le Mans) has a full size spare - so yours must do. Would probably be easier to check that. Or phone up an Audi dealer on the pretence of having a cracked alloy an wanting to buy a new one from them. Then ask to check what the dimensions are. Link to comment Share on other sites More sharing options...
Ian_C Posted December 14, 2012 Report Share Posted December 14, 2012 Ours (3.0 TDI Le Mans) has a full size spare - so yours must do. Would probably be easier to check that. Nice little surprise for James then! (although if he didn't find / check it pre-purchase, sods law says it will be kerbed to buggery) Yours is one of the last Audis to have a full sized spare Kell - the 2.0 litre A4 my auntie just bought has a fricking space saver! Link to comment Share on other sites More sharing options...
shao_khan Posted December 17, 2012 Report Share Posted December 17, 2012 The Quoted figures are as below, this applies for quite a while so appears they havent changed on the A6 for years. PCD : 5x112 Offset : 35 to 45 Bore : 57.1 All the option wheels for the A6 going back sometime in both 19" and 20" are 8.5j so I'd susepct the lemans wheels are the same. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now