m4t Posted August 5, 2006 Report Share Posted August 5, 2006 Hi all, Bit of a gay request maybe but i have a mk4 r32 and would like just the ends of a miltec exhaust to fill the cutouts a little better. Not really fussed on making the car quicker or improving the sound as it's all fine as it is, anyone any ideas? I did ask miltec at inters and they said they didnt do them? Anyone know anywhere who might? Cheers, Mat Link to comment Share on other sites More sharing options...
RedRobin Posted August 5, 2006 Report Share Posted August 5, 2006 Milltek, or their appointed dealers won't supply or fit only parts of their systems to fit with other makers' exhausts - Quite rightly in my opinion. Link to comment Share on other sites More sharing options...
Dan32 Posted August 6, 2006 Report Share Posted August 6, 2006 There must be a universal tip that you could have someone professional weld on. Have a look in Halfords as a start and then look at *dare I say it* Maxpower and the like. You could also try Blueflame as they may 'allow' you to have 2 of their tips to be welded on. Link to comment Share on other sites More sharing options...
Tarmac_Terrorist Posted August 6, 2006 Report Share Posted August 6, 2006 Maybe an aftermarket accesory outlet like Carnoisseur may help. IIRC they do exhaust tips in a variery of sizes. Link to comment Share on other sites More sharing options...
Dannyrado Posted August 7, 2006 Report Share Posted August 7, 2006 Hi, Westec sell loads of EIP stainless tips. Search for EIP on their site. http://www.shopwestec.com Link to comment Share on other sites More sharing options...
UKLooney Posted August 7, 2006 Report Share Posted August 7, 2006 Quite fancy a pair of these nicely rounded tips Link to comment Share on other sites More sharing options...
m4t Posted August 8, 2006 Author Report Share Posted August 8, 2006 Hi Guys, thanks for all the tips, i reckon i might just go down the milltek route and get the proper job, what sort of gains will i expext from just the cat back system without any remapping etc? Regards, Mat Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now