chasdrury Posted October 7, 2007 Report Share Posted October 7, 2007 Hi guys I have today replaced my centre console becuase I had cut the hole for the armrest very badly. That's all fine and the centre console is back in. Now, in my old centre console, where the cig lighter was there was a little coin tray, a piece of rubber in the hole with the plastic bottom part of the centre console. Now, on this centreconsole there is just a huge hole where the cig lighter should have been, no moulding for the coin tray. Presumably there is a part I can buy to fill this hole... What part is it, what does it look like??????!! Cheers Chaz Link to comment Share on other sites More sharing options...
S3Mark Posted October 8, 2007 Report Share Posted October 8, 2007 When I changed mine I had to remove the cig lighter/tray off the old on and put it into the new console. Fro memory it was just one screw holding it in place. Link to comment Share on other sites More sharing options...
craigyb Posted October 8, 2007 Report Share Posted October 8, 2007 What he said, but I remember it as two screws of 20 TORX Link to comment Share on other sites More sharing options...
chasdrury Posted October 8, 2007 Author Report Share Posted October 8, 2007 Hmmm, will have a look at that then... I looked at the old one and I am sure it was moulded ontot he centreconsole as part of the it.. Will have a look! Chaz Link to comment Share on other sites More sharing options...
chasdrury Posted October 8, 2007 Author Report Share Posted October 8, 2007 So, I am a complete prat. I found the 2 screws. The whole bloody lot is coming out again then. Damn! Thanks all! Chaz Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now