MajorH Posted January 31, 2008 Report Share Posted January 31, 2008 Does it strip wax ? Link to comment Share on other sites More sharing options...
wyliss Posted January 31, 2008 Report Share Posted January 31, 2008 I it will do if used incorrectly, prob best to get one of the Meg APC bottles which has dilution rates on the side. I use it for Arches, tyres and general grubby marks in the car. Its good stuff. Link to comment Share on other sites More sharing options...
MajorH Posted January 31, 2008 Author Report Share Posted January 31, 2008 Cheers Link to comment Share on other sites More sharing options...
ahaydock Posted January 31, 2008 Report Share Posted January 31, 2008 Yes I have two bottles so I can mix one 10:1 and one 4:1 and use the 10:1 on my wheels and calipers when they are soiled and then a mixture of the the two on arches, sills, shuts, Engine Bay and Interior etc. Top stuff though I use my bottles with the foaming head! Link to comment Share on other sites More sharing options...
drpellypo Posted January 31, 2008 Report Share Posted January 31, 2008 Yes, it will if used strong. If a weak solution though, it won't, unless you use it repeatedly. Link to comment Share on other sites More sharing options...
bpsmith Posted January 31, 2008 Report Share Posted January 31, 2008 How well does it work in the Foam Lance? I also use it with the foaming head and happy but wonder what it would be like in the lance if I was to do a quick layer as first wash and a mates car that has not been washed all winter? Link to comment Share on other sites More sharing options...
ahaydock Posted January 31, 2008 Report Share Posted January 31, 2008 I am using it in the pic below. I had about an inch of APC, an inch of SSF and a capful of CG Maxi Suds. There is a noticeable difference when I dont use the APC. I only use the APC on a car that has no LSP. Link to comment Share on other sites More sharing options...
bpsmith Posted January 31, 2008 Report Share Posted January 31, 2008 Cheers fella. Might well give that a shot then as I know this has not been washed properly since the end of August at a guess! No real LSP either. The missus' A2 also needs a going over but was sealed before the Winter so might hang fire on that one until I have the chance to give it a full detail again. Certainly looks like it works a treat in that pic too! Link to comment Share on other sites More sharing options...
drpellypo Posted January 31, 2008 Report Share Posted January 31, 2008 You can use APC on it's own as a pre-wash. It'll strip wax and in turn offer a good prep for starting again etc. Link to comment Share on other sites More sharing options...
wyliss Posted February 1, 2008 Report Share Posted February 1, 2008 What concentration would you use to start over again? Link to comment Share on other sites More sharing options...
drpellypo Posted February 1, 2008 Report Share Posted February 1, 2008 I use it in a garden type, pump action sprayer. I'd say about 1 part APC to about 5 parts water. I think anyway. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now