Routing wires form battery to boot

[asd123]

As per title, I need to run some wires from the positive terminal on the battery to the boot area.

Is there an easy way to do this, either passenger side or drivers.

For info the wire is from the supplementary harness kit (22400512RC), which is used to connect to the dedicated tow-bar wiring kit 29010506RC, and allows a fridge and caravan battery to be charged when towing.

I have to pull out most of the trim in the boot and by the bottom of the doors on the drivers side, and just under the dash to connect the tow-bar electrics from the boot to the fuse box and CAN-BUS, so is there an easy route there.

cheers

[asd123]

Second try,

Does anyone please know of a relatively painless way to run a wire from the positive terminal of the battery (front of the car, under the bonnet/hood, to the rear of the car(boot/trunk), via the bulk head.

The car is a Audi A4 Avant Auto B7.

If not, can anyone recommend a more "technically knowledgeable" forum

Many thanks Jon

[maersk]

Unless someone tells you different I reckon there is no 'easy' way. The route as you say is along the door bottom trims and through to the boot.

There is a thread on here regaarding a boot socket which outlines it. Try search.

[Sponge]

What he said ^.

[Sponge]

PS I think there might be a few pictures of how I did it, in my guide.

See here.

[asd123]

Thanks Maersk and Sponge, and thanks for the link Sponge.