Jump to content

Removing and Adjusting the Front Fog Lights


PaulW
 Share

Recommended Posts

Here are the instructions for removing/installing/adjusting the front fog lights:

Fog lights, servicing

Fog lights, removing and installing

WARNING!

Disconnect battery Ground (GND) strap before working on the electrical system.

Notes:

Obtain radio code before disconnecting battery.

Be sure to activate vehicle features (radio, clock, electric window regulators) according to owner's manual when the battery is re-connected.

Important notes:

To prevent contact corrosion, use only approved bolts, nuts, washers etc.

These items have a special surface coating and can be recognized by their greenish color.

These bolts must also be stored separately.

fog1.gif

Removing

- Remove air grill by pulling latch -3- downward using a flat head screwdriver.

- Remove trim plate at fog light forward. Trim plate is secured with three latches -2-.

fog2.gif

- Trim plate is inserted in guides -3- at fog light.

- Remove mounting screws -1-.

- Remove fog light from bracket -2- by pulling forward slightly.

- Disconnect electrical harness connector.

Installing

- Complete installation in reverse order of removal.

- Adjust fog light after installing

Fog lights, adjusting

fog3.gif

- Adjust the appropriate adjustment screw using a socket wrench (6 mm) or a Phillips-head screwdriver.

- Turn adjustment screw counter clockwise to lower beam height. Adjustment screw can be accessed via hole -1- in air grill. Horizontal adjustment is not possible.

Fog light bulb, replacing

fog4.gif

Removing

- Remove fog light

- Turn cover -1- in direction of arrow and remove it.

- Disconnect electrical harness connector at bulb.

- Disengage wire clamp -1- and remove bulb for fog light (12V 55W H3) from housing.

Installing

- Complete installation in reverse order of removal.

- Adjust fog light after installing

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...