M5LLO Posted December 20, 2005 Report Share Posted December 20, 2005 Help please needed Who can do the conversion for me,and what parts are needed etc etc How much money would be required for conversion Thanks in advance for advice Darren Link to comment Share on other sites More sharing options...
shao_khan Posted December 20, 2005 Report Share Posted December 20, 2005 There is a guy on Clublupo.co.uk who had a 1.8t lupo. You would be looking at 10k i'd guess for someone to do all the work for you. Link to comment Share on other sites More sharing options...
s4_sat Posted December 21, 2005 Report Share Posted December 21, 2005 jabbasport did one iirc..................or was it the one with the 2.9 vr6? Link to comment Share on other sites More sharing options...
helfinger Posted December 22, 2005 Report Share Posted December 22, 2005 [ QUOTE ] Help please needed Who can do the conversion for me,and what parts are needed etc etc How much money would be required for conversion Thanks in advance for advice Darren [/ QUOTE ] give these guys a call they have done a few JBS Link to comment Share on other sites More sharing options...
Tigz Posted January 3, 2006 Report Share Posted January 3, 2006 JBS charge £8k for the conversion. You'd need to find your own engine. Link to comment Share on other sites More sharing options...
M5LLO Posted March 5, 2006 Author Report Share Posted March 5, 2006 Thanks for the reply but 8k to fit an engine that i supply seems a bit steep thanks anyway m8 Link to comment Share on other sites More sharing options...
Decked Posted March 5, 2006 Report Share Posted March 5, 2006 Here is my mates Polo S3 lump. £8K isn't bad and it does need a lot of work, custom driveshafts etc. Bit of a beast, still to give him a race but in a straight line it will kick my arse.... Mines kicking out over 310bhp and everyone thats been in it and driven it says i'll need a turbo to keep up. A Lupo will just be an animal!!! I'm tempted to sort out a Mk1 Golf??? Link to original thread Link to comment Share on other sites More sharing options...
polose Posted March 13, 2006 Report Share Posted March 13, 2006 Thats my polo and the company that done it is called the Phirm. A guy called tim. You should give him a called. It cost more than £8000. But it went in as a standard 1.4 and come out like it is now. that is alloys, suspension limited slip dif spa clocks with gauges for boost pressure, oil temp etc exhaust engine fitted, custom drive shafts, But engine not included, they found the engine and i had to buy it same with gear box Plus a nice guys down there to. You can find in the back of performance vw. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now