nickbell Posted April 7, 2007 Report Share Posted April 7, 2007 I have got some of the way through removing rear bumber on my B6 cab and I am stuvk anyone got a picture guide the one on audiretrofit is not right for my car! Thanks in advance! Link to comment Share on other sites More sharing options...
harddrive Posted April 7, 2007 Report Share Posted April 7, 2007 What stage are you at? Link to comment Share on other sites More sharing options...
nickbell Posted April 7, 2007 Author Report Share Posted April 7, 2007 i have remove torx screws from under wheel arches 2 outer 4 inner both sides. Link to comment Share on other sites More sharing options...
harddrive Posted April 7, 2007 Report Share Posted April 7, 2007 Not sure but let me know if these pictures help? Link to comment Share on other sites More sharing options...
harddrive Posted April 7, 2007 Report Share Posted April 7, 2007 Link to comment Share on other sites More sharing options...
harddrive Posted April 7, 2007 Report Share Posted April 7, 2007 Link to comment Share on other sites More sharing options...
harddrive Posted April 7, 2007 Report Share Posted April 7, 2007 [ QUOTE ] i have remove torx screws from under wheel arches 2 outer 4 inner both sides. [/ QUOTE ] Your next step should be to remove the trim in the boot: 1 - Rear cross panel trim t Removing – Take floor covering out of luggage compartment. – Remove luggage compartment light → Chapter. – Unfasten the rear cross panel trim -1- upwards from the clips -2- (4x). Link to comment Share on other sites More sharing options...
harddrive Posted April 7, 2007 Report Share Posted April 7, 2007 1 - Handle mount trim Note The convertible top must be closed. q Use small flat screwdriver to prise out cover -2-. q Unscrew bolt -3-. q Move over handle. q Use small flat screwdriver to prise out cover -2- on other side. q Unscrew second bolt -3-. q Unscrew bolts -4- from underneath. q Unfasten handle mount trim -1- at clips -5- (2x). q Prise out fastener -6- (always replace fastener -6-). q Disengage Bowden cable -7- at handle. 2 - Cover (2x) 3 - Bolts (2x) q Tightening torque 9 Nm 4 - Bolts (2x) q Tightening torque 7 Nm 5 - Clips (2x) 6 - Fastener q Always replace 7 - Bowden cable Link to comment Share on other sites More sharing options...
harddrive Posted April 7, 2007 Report Share Posted April 7, 2007 - Convertible top compartment flap Note t The variable convertible top compartment must be in the lowest position. t Removal of convertible top compartment flap -1- does not involve unscrewing hinges -2-. t Arrow points in direction of travel. q Bend convertible top compartment flap -1- on one side at hinge and disengage convertible top compartment flap -1- at hinges. q Fold down convertible top compartment flap -1-. q Disengage flap at hooks -4- (2x) by sliding forwards. 2 - Hinge (2x) q Bend convertible top compartment flap -1- on one side at hinge and disengage convertible top compartment flap -1- at hinges. q Unscrew bolt -3-. q Disengage hinge -2- from body. 3 - Bolt (2x) 4 - Hook 5 - Variable convertible top compartment Link to comment Share on other sites More sharing options...
nickbell Posted April 7, 2007 Author Report Share Posted April 7, 2007 thanks for these. I am still not very sure where these screws are located. do i have to remove the boot lining? Link to comment Share on other sites More sharing options...
harddrive Posted April 7, 2007 Report Share Posted April 7, 2007 1 - Right side trim t Removing – Take out luggage compartment floor covering. – Remove the rear cross panel trim → Chapter. – Remove the handle mount trim → Chapter. – Remove the convertible top compartment flap → Chapter. – Remove luggage compartment light → Chapter. – Unfasten clip -2-. – Pull off right side trim -1- in direction of arrow. Link to comment Share on other sites More sharing options...
harddrive Posted April 7, 2007 Report Share Posted April 7, 2007 1 - Left side trim t Removing – Take out luggage compartment floor covering. – Remove the rear cross panel trim → Chapter. – Remove the handle mount trim → Chapter. – Remove the convertible top compartment flap → Chapter. – Unfasten clip -2-. – Pull off left side trim -1- in direction of arrow. Link to comment Share on other sites More sharing options...
harddrive Posted April 7, 2007 Report Share Posted April 7, 2007 The only other thing you may need to do is removed the cross member. Link to comment Share on other sites More sharing options...
harddrive Posted April 7, 2007 Report Share Posted April 7, 2007 Hope this helps. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now