bmx Posted May 4, 2007 Report Share Posted May 4, 2007 does anyone know of a fitting guide for the ARB's on a mk5 Golf? without having a look i wondered if anyone knew what the job entailed, ie does it involve droping the subframe like on the mk4 chassis. Link to comment Share on other sites More sharing options...
petsy Posted May 4, 2007 Report Share Posted May 4, 2007 is this for the front or rear arb? the rears are easy but the fronts entail alot of work. Link to comment Share on other sites More sharing options...
bmx Posted May 4, 2007 Author Report Share Posted May 4, 2007 both bars fitting guide if possible but front is the most wanted please Link to comment Share on other sites More sharing options...
bmx Posted May 4, 2007 Author Report Share Posted May 4, 2007 i did the front arb on my TT quattro. is it a similar job to that? Link to comment Share on other sites More sharing options...
AdyGTI Posted May 5, 2007 Report Share Posted May 5, 2007 The rear one is really very simple on the GTI. I had my car up on some ramps for an oil/filter change and it's all out in the open. Just six nuts/bolts and the rear one is off no problems. The front one, whilst I couldn't get a good look at it looks more involved. From what I could see, and this might be incorrect, that the Anti-roll bar bolts onto the top of the front subframe in what looked to be a tight area. Not sure if you'ld need to drop the subframe though. You might be able to unbolt it and pull it out the fromthe front wheel arch but I just can't say for sure. Hope that helps. Link to comment Share on other sites More sharing options...
RedRobin Posted May 5, 2007 Report Share Posted May 5, 2007 IIRC it helps to put car high up in the air and remove wheels to then fit the ARBs. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now