shark_90 Posted April 16, 2006 Report Share Posted April 16, 2006 I have a 2001 B6 A4 and I wondered if I bought the lit vents from ebay.de, would there be anywhere to plug them into or would I have to tap a feed from another sidelight activated light? It would just finish off my interior Link to comment Share on other sites More sharing options...
Nelson_R32 Posted April 17, 2006 Report Share Posted April 17, 2006 Your airvents will already have the inserts/LED's in place, its just a case of getting the relevant connectors/pins/feeds to them Link to comment Share on other sites More sharing options...
shark_90 Posted April 17, 2006 Author Report Share Posted April 17, 2006 Right, next job Link to comment Share on other sites More sharing options...
shark_90 Posted April 18, 2006 Author Report Share Posted April 18, 2006 I've had the vents out to have a look.. the centre vent has the LED's pre wired with a socket on the vent itself. I'm sure there'll be a plug to fit it, so I'll need to get a prewired plug to fit it and tap a feed from somewhere. The driver's side vent also seems to be prewired, but the wire goes into the dash and seems to be connected/trapped somewhere as I can only just remove the vent fully and the wire is tight. Anyone got any ideas? Link to comment Share on other sites More sharing options...
Mo-S3 Posted April 18, 2006 Report Share Posted April 18, 2006 The wire is tight because its locked into a holder that is attached to the plastic airpipe that is going to the vent. They need to be twisted from underneath. Link to comment Share on other sites More sharing options...
shark_90 Posted April 18, 2006 Author Report Share Posted April 18, 2006 Ah yes, I've just traced it back with a torch on the passenger side and I can see it with the side of the glovebox removed. Now all I need to do is find the plugs, make up a wiring harness and find a feed. Any ideas on the feed at all? I've put that question in a separate thread Link to comment Share on other sites More sharing options...
Mo-S3 Posted April 18, 2006 Report Share Posted April 18, 2006 Mr Shark, ive already replied to that thread. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now